Pins

A technician rewired an existing ceiling light to power a new bathroom fan location, ensuring correct power distribution. This electrical service was completed in Greensboro, North Carolina.

A technician performed HVAC maintenance and advised on ways to improve indoor air quality in Burlington, North Carolina. The service included inspecting system components and offering recommendations to support cleaner airflow throughout the home.

A backup generator connection was installed in Winston-Salem, NC. A transfer kit was added to the main panel for safe operation. A generator plug was placed outside, and a dedicated line was run to the panel. This setup ensures reliable backup power when needed.

A technician in High Point, North Carolina replaced a broken water heater and identified a faulty contactor as the cause of the problem. The system was repaired on the same day to restore proper operation.

Our technicians installed a new First Company air conditioning unit with a matching 2-ton Goodman air handler in Winston-Salem, NC. We added a new base box, drain pan, and heat strips for efficient performance. The thermostat was programmed to optimize energy use.

Technicians in Greensboro, North Carolina, installed a customer-provided steam humidifier and two surge protectors. The system was thoroughly tested and confirmed to be operating as expected.

A technician in Winston-Salem, NC, installed two new circuits for a septic pump and alarm by digging a 10-foot ditch to connect with the septic system. The circuits were integrated into the exterior metermain panel, and the system was tested to ensure proper voltage functionality.

An electrician resolved tripped breakers in Lexington, NC. The technician investigated the issue, identified the cause, and ensured proper functionality. This service focused on restoring electrical systems for reliable and safe operation in residential properties.

Home Service Pro upgraded an HVAC system in Greensboro, NC. The project included replacing an old heat pump and air handler with a Goodman heat pump, matching air handler, and heat strips. A programmable thermostat and a new system pad were also installed.

Emergency electrical panel upgrade services were completed in Staley, North Carolina, to address a power outage affecting multiple appliances, including the furnace, stove, and microwave. An onsite diagnosis identified a faulty electrical panel, which was replaced promptly to restore functionality.

A certified technician from HOME SERVICE PRO resolved a non-working outlet issue promptly, restoring functionality during a service call in Winston-Salem, North Carolina. This electrical repair ensured reliable power for the customer’s needs.

Performed a lighting upgrade for a yoga studio in Greensboro, NC. Work included installing low-profile LED dimmable lights, adding two new switches, replacing two dimmer switches, and removing a kitchen exhaust fan to enhance energy efficiency and functionality.

Expert HVAC technicians in Winston-Salem, NC, performed a two-system HVAC maintenance service. The team inspected, cleaned, and optimized both heating systems, ensuring efficiency and reliability for the winter season. This service helps maintain warm and comfortable indoor temperatures while preventing potential issues.

Electricians in High Point, NC resolved a tripping breaker issue for a homeowner. The team identified the cause and completed the repair on the same day, ensuring safe and reliable electrical functionality.

A technician provided same-day duct replacement services following a free estimate in Mocksville, North Carolina. The expert evaluation and immediate solution ensured seamless service for the customer's HVAC system needs.

Home Service Pro provided comprehensive HVAC and electrical services in Greensboro, North Carolina. The team repaired an air conditioning system, checked a solar edge inverter for proper operation, and replaced a faulty 30-amp SQD HOM breaker to ensure safe, reliable power flow. Systems were confirmed fully operational.

Home Service Pro provided air conditioning repair and maintenance in Kernersville, NC. The team restored system functionality, inspected the solar edge inverter, and replaced a faulty 30-amp SQD HOM breaker to ensure safe power flow. All systems were tested and verified as fully operational.

A technician completed an AC tune-up and added freon in High Point, North Carolina. The service improved system performance and helped restore proper cooling. Regular maintenance checks support energy efficiency and reduce the chance of breakdowns during warmer months.

A contractor provided an estimate to install a Trane 2-ton HVAC unit in Kernersville, North Carolina. This service ensures appropriate system sizing for efficient cooling and heating in residential spaces. Trane systems offer consistent indoor temperatures by matching the unit to home square footage and usage patterns.

A technician completed an outlet repair and switch replacement in Greensboro, North Carolina. The service involved fixing faulty electrical outlets and installing new switches to ensure proper function and safety.

A contractor completed bathroom vent and roofing work in High Point, North Carolina. The service involved inspecting and repairing the bathroom ventilation system and addressing roof-related issues to improve airflow and prevent moisture damage.

An electrician installed a dedicated 20 amp breaker to support increased electrical demand in Winston-Salem, North Carolina. This upgrade improves circuit safety and helps prevent overloads by providing a separate power source for high-load appliances or equipment.

An electrician in High Point, North Carolina installed multiple outlets and light fixtures for a residential project. This service improved the home's electrical access and lighting functionality. The installation followed standard safety practices and ensured reliable power distribution throughout the space.

A technician rewired a Rheem air handler in High Point, North Carolina. The service improved electrical connections and restored proper function. This type of repair supports safe operation and efficient airflow in residential HVAC systems.

A technician completed an AC tune-up and maintenance service in Kernersville, North Carolina. The work included inspecting system components, cleaning filters, and checking refrigerant levels to support efficient cooling. This service helps air conditioning systems operate reliably during warm weather.

A technician installed a new HVAC unit in Greensboro, North Carolina. The installation ensures efficient heating and cooling for the property. This service supports improved indoor air control and system reliability across seasons.

A technician completed an AC tune-up and maintenance service in Greensboro, North Carolina. The service included inspecting components, cleaning the unit, and checking system performance to support energy efficiency and prevent breakdowns. This routine maintenance helps ensure proper cooling during warm weather.

A technician installed a new HVAC unit and completed duct work in Greensboro, North Carolina. The service included placing the system and connecting it to new air distribution ducts to support efficient airflow throughout the property.

A technician in Winston-Salem, North Carolina provided an estimate for a new heating and cooling unit. The visit involved assessing the current system and identifying requirements for a replacement that meets the home's size and climate control needs.

A technician provided an estimate for a residential air conditioning unit in Reidsville, North Carolina. The visit focused on assessing the system's size, condition, and installation needs to prepare for potential cooling upgrades or replacements.

A technician provided an estimate for replacing a 38-year-old HVAC unit in Burlington, North Carolina. The evaluation focused on identifying system aging and preparing for a full replacement to restore performance and efficiency.

A technician flushed and repaired a leaking drain line in Greensboro, North Carolina. The service restored proper flow and prevented further water damage.

A technician inspected a dual-zone HVAC system in Greensboro, North Carolina, after the customer reported the downstairs area was not cooling. The assessment focused on diagnosing airflow or equipment issues affecting temperature control in the lower level of the home.

A technician inspected and diagnosed an AC unit that was not cooling in Greensboro, North Carolina. The service addressed cooling issues to restore proper function and indoor comfort.

A technician replaced an HVAC filter at a residential property in Winston-Salem, North Carolina. The service helped maintain proper airflow and system efficiency. Regular filter changes support consistent indoor air quality and reduce strain on HVAC equipment.

A contractor installed a new heating and air unit in High Point, North Carolina. The project involved setting up the system and ensuring proper operation. This service supports indoor climate control and improves system performance for residential or commercial use.

A technician repaired non-functioning electrical outlets and switches in Winston-Salem, North Carolina. The service restored power and ensured safe operation of the home’s electrical system.

An electrician rewired an entire house in Winston-Salem, North Carolina. The service included replacing outdated electrical wiring to improve safety and ensure code compliance throughout the home.

A technician repaired storm damage to a rooftop solar panel in High Point, North Carolina. The service included assessing panel integrity and restoring full function to the affected system. This work helps maintain proper energy output and prevents further issues caused by exposure or electrical faults.

A technician corrected a previous installation error that caused operational issues. The service restored proper function and resolved the customer’s concerns. This work took place in Winston-Salem, North Carolina.

A plumber located and repaired a leaking pipe and drain line in Greensboro, North Carolina. The service addressed a water leak that required pipe replacement and drain line repair to prevent further damage and restore normal plumbing function.

A technician repaired an air conditioning unit that was not cooling or blowing air in Burlington, North Carolina. The service restored proper airflow and cooling to the system, ensuring the unit operated efficiently.

A contractor in Winston-Salem, North Carolina provided an estimate for a generator installation and related electrical services. The visit included reviewing the site and discussing additional service requirements with the property owner. This initial assessment supports planning for safe and efficient generator setup.

A contractor removed and replaced the HVAC system and ductwork in Greensboro, North Carolina. The service included dismantling old components and installing new heating, ventilation, and air conditioning systems with updated duct lines to improve airflow and system efficiency.

Technicians removed and replaced an HVAC unit and ductwork in Winston-Salem, North Carolina. The team installed new components to support consistent airflow and reliable indoor climate control. This service helps maintain system efficiency and improves long-term performance in residential properties.

A technician removed and repaired an AC unit in Lexington, North Carolina. The service included disconnecting the system, diagnosing the issue, and restoring proper function. This ensured the unit operated efficiently and provided consistent cooling.

A technician troubleshooted and installed a garbage disposal in Greensboro, North Carolina. The service addressed a malfunctioning unit and ensured proper setup of the new disposal system.

An electrician rewired a metal building in Winston-Salem, North Carolina. The project included removing outdated wiring and installing new electrical systems to meet current codes. This upgrade improved power distribution and ensured safe operation for future use.